Back

ⓘ Automotive industry in Australia




Automotive industry in Australia
                                     

ⓘ Automotive industry in Australia

A substantial car industry was created in Australia in the 20th century through the opening of Australian plants by international manufacturers. The first major carmaker was Ford Australia and the first Australian-designed mass production car was manufactured by Holden in 1948. Australian manufacture of cars rose to a maximum of almost half a million in the 1970s and still exceeded 400.000 in 2004. Australia was best known for the design and production of large sized passenger vehicles. By 2009 total production had fallen to around 175.000 and the Australian market was dominated by cars imported from Asia and Europe.

As of 2015, Australian-designed cars were manufactured by General Motors subsidiary Holden, and Ford Australia, while Toyota Australia manufactured local variants of its international models, particularly the Camry. However, the Ford Australia engine and vehicle plants closed in October 2016 and the Holden and Toyota Australia factories closed in late 2017. Both Ford and Holdens design and development facilities remain in operation and are expanding, leaving Australia as one of 13 countries with the capabilities to design and develop mass market cars from scratch.

                                     

1. History

Australian constructors were very active at the very beginning of both car and aircraft development and in some areas, ahead of their overseas counterparts. Due to the isolation of Australia, it was more practical for Australia to make their own cars.

The Highland was one of the first types of automobiles to be offered for sale in Australia, firstly in 1894 as a primitive motorised tricycle, then two years later as a four-wheeled, two-seater vehicle using bicycle components.

The first true cars made in Australia were steam cars. The first of these steam cars, the Phaeton, was made in 1896 by Herbert Thomson and Edward Holmes of Armadale, Melbourne. It was exhibited in 1900 using the first pneumatic tyres made in Australia by Dunlop. The 5 horsepower single cylinder steam carriage which is now in the Institute of Applied Sciences, Melbourne, was reliable and durable enough to take Thomson and a friend 493 miles from Bathurst to Melbourne at an average speed of 8.7 mp/h.

In 1900 Bruno Hammer built a one off automobile in Mount Torrens, South Australia.

In 1901 Harley Tarrant produced the first Tarrant automobile, which was the first petrol-driven car built entirely in Australia in a small workshop in Melbourne. Before that, Tarrant had been using the shop to build engines. Tarrant was joined in this endeavour by bicycle maker, Howard Lewis. The car was powered by a rear-mounted 6 hp Benz engine. This car was followed by many improved designs, including the first fully enclosed car body made in Australia. Later models included locally produced components including: engines, gearboxes and rear axles. The sole surviving Tarrant is on display at the RACV City Club, on the chancery level.

In 1903, the Australian Motoring Association was formed in New South Wales, South Australia and Victoria to protect the interests of motorists. In 1924, this was followed by the Australian Automobile Association.

Tyre manufacture also existed in Australia. However, the last tyre factory closed in April 2010 when Bridgestone ceased production.

                                     

2. Large scale manufacturers

Bustech

Bustech has manufactured buses on the Gold Coast, Queensland since 1998.

Denning Manufacturing

Denning Manufacturing has manufactured buses in Brisbane since 2004.

British Leyland

British Leyland assembled and manufactured vehicles in Australia from 1950 to 1975. British Leyland was formed when Leyland Motors and British Motor Holdings formerly BMC merged.

                                     

2.1. Large scale manufacturers Bustech

Bustech has manufactured buses on the Gold Coast, Queensland since 1998.

                                     

2.2. Large scale manufacturers Iveco

Iveco Australia is a subsidiary of CNH Industrial, it currently produces the Iveco PowerStar. It is known for being the only foreign semi truck maker that isnt producing an American branded Conventional semi truck.

                                     

2.3. Large scale manufacturers Paccar Inc

Kenworth Australia is a subsidiary of Paccar Inc, Kenworth Australia mainly manufactures semi trucks specifically for the Australian market, which includes the T4909SAR, C509, T359, T659, T909 and the K200.

                                     

2.4. Large scale manufacturers Australian Motor Industries

Founded in 1926, Australian Motor Industries AMI began assembly operations in 1952. It produced a wide range of Standard, Triumph, Mercedes-Benz cars, as well as variety of Rambler models from American Motors Corporation AMC up to 1987. Assembly of Toyota automobiles began in 1963. The Japanese company took a controlling interest in AMI in 1968 and increased its investment until AMI renamed itself as AMI Toyota Ltd in 1985.

                                     

2.5. Large scale manufacturers British Leyland

British Leyland assembled and manufactured vehicles in Australia from 1950 to 1975. British Leyland was formed when Leyland Motors and British Motor Holdings formerly BMC merged.

                                     

2.6. Large scale manufacturers Chrysler Australia

Chrysler departed the Australian car market in 1981 when it sold the remainder of its shareholding in Chrysler Australia Ltd to the Mitsubishi Motor Corporation of Japan. The new owner renamed the company Mitsubishi Motors Australia MMA and this company continues to operate today as one of Australias major importers of road vehicles. However, local production of passenger vehicles was discontinued in March 2008. During the 1970s, Chrysler began working closely with Mitsubishi Motors Corporation after they acquired a 15 percent interest in the company in 1971, with the result that Chrysler Australia began building Mitsubishi-designed Chrysler-branded vehicles such as the Chrysler Valiant Galant 1972–1977 Mitsubishi Galant and the Chrysler Sigma 1977–1985 Mitsubishi Galant. The Tonsley Park plant was sold to Mitsubishi Motors Corporation and was run by Mitsubishi Motors Australia after Chrysler pulled out of Australian manufacturing in 1980. Production of the popular Sigma and Colt range of vehicles continued under the Mitsubishi name until the late-1980s, when production was switched exclusively to the Magna.



                                     

2.7. Large scale manufacturers Ford Australia

Ford Australia is the Australian subsidiary of Ford Motor Company and was founded in Geelong in 1925 as an outpost of Ford Motor Company of Canada, Limited. At that time, Ford Canada was a separate company from Ford USA. Henry Ford had granted the manufacturing rights to Ford in British Empire later Commonwealth countries excepting the UK to Canadian investors. Ford Australia also has a performance car division, Ford Performance Vehicles, with the cars being marketed under the FPV brand. In May 2013 Ford announced that it will end Australian production in October 2016, but will remain as a competitor in the Australian marketplace with imported vehicles. All factories had closed by 20 October 2016.

                                     

2.8. Large scale manufacturers Holden

Holden was an Australian automaker based in Port Melbourne, Victoria. After local production ended in 2017, the company became an importer of GM-branded motor vehicles. The company was founded in 1856 as a saddlery business, but later moved into the automotive field, becoming a subsidiary of General Motors GM in 1931. Holden has taken charge of vehicle operations for GM in Australasia and, on behalf of GM, holds partial ownership of GM Korea formerly GM Daewoo in South Korea. Over the years, Holden has offered a broad range of original, locally produced vehicles such as the Holden Commodore, supplemented by imported GM models. In the past, Holden has offered badge engineered Chevrolet, Isuzu, Nissan, Suzuki, Toyota, and Vauxhall Motors models in sharing arrangements, with Daewoo, Opel, and Isuzu-sourced models sold currently. Holden also has a performance vehicle partner, Holden Special Vehicles, which markets modified Holdens under the HSV brand. In December 2013, Holden announced they would end their local manufacturing operations in Australia 20 October 2017. After the closure of its production plant in Elizabeth, South Australia, Holden changed its business focus to car designing and importing.



                                     

2.9. Large scale manufacturers Mitsubishi Motors Australia

Mitsubishi Motors Australia MMA is a fully owned subsidiary of parent company Mitsubishi Motors Corporation of Japan. A site in Tonsley, South Australia was the location of MMAs vehicle assembly plant. The plant was closed in March 2008 when lacklustre sales of the large Mitsubishi 380 confirmed that domestic vehicle manufacturing was no longer viable.

                                     

2.10. Large scale manufacturers Nissan Australia

Nissan first began assembling cars in 1966, when Pressed Metal Corporation began assembly of the Datsun Bluebird 1300. This deal ended after about a year and a half, however, but by 1968 Motor Producers Ltd. of Melbourne began assembling Datsuns again at their Clayton plant. By 1971 locally assembled cars were to include the 1200 and 1600 saloons, with at least 60% local parts content. A deal lasting until 1976 was signed with Motor Producers.

Nissan used the Clayton factory to build cars in the wake of the 1973 oil crisis. Models produced in Australia included the Pulsar, Pintara, and Skyline. By the end of the 1980s however, Nissan was facing financial difficulties, while Nissans local car assembly lines closed in 1992.

                                     

2.11. Large scale manufacturers Renault Australia

Renault Australia Pty Ltd was established in the late 1950s to organise the importation and contract assembly of Renault vehicles in Australia. In August 1966 Renault Australia purchased the assembly facilities of Continental and General Distributors at Heidelberg in Victoria. Models including the Renault 10, 12, 16 and 18 were assembled and the company also entered into an agreement to assemble cars for Peugeot. Australian production ended with the closure of the Heidelberg plant in July 1981 with LNC Industries then taking over importation and distribution of Renaults in Australia. As of 2012, Renault vehicles are sold in Australia through Vehicle Distributors Australia, a wholly owned subsidiary of Nissan Australia.

                                     

2.12. Large scale manufacturers Rootes Australia

Rootes Australia produced a range of Hillman, Humber, and Singer automobiles in Australia between 1946 and 1965. In December 1965, Rootes Australia was merged with Chrysler Australia.

                                     

2.13. Large scale manufacturers Toyota Australia

Toyota Motor Corporation Australia TMCA, is a subsidiary of Toyota Motor Corporation, which is based in Japan. TMCA first began in 1958, TA markets Toyota products and manages motorsport, advertising and business operations for Toyota Motor Corporation in Australia. TA is also responsible for Lexus vehicles in Australia.

On 10 February 2014, Toyota announced it would cease manufacturing vehicles and engines in Australia. The Altona plant was closed on 3 October 2017, marking the end of locally produced Toyota vehicles in Australia.

                                     

2.14. Large scale manufacturers Volkswagen Australia

Volkswagen Australia Pty Ltd was formed in 1954 by Volkswagen of Germany and various Australian state Volkswagen distributors. The company acquired a suitable site from Martin & King situated at Clayton having facilities for CKD vehicle assembly in Victoria, that site having been used for local assembly of the Volkswagen Beetle since 1954. By 1960, sheet metal panels were being pressed at Clayton, and by 1967 the engine and most components were being produced there.

In 1967 Volkswagen Australia developed a unique model, the Country Buggy, which used components from the Beetle and the Kombi.

Due to falling sales, the operation reverted to assembly only in 1968. A new company, Motor Producers Limited, was formed and operations were expanded to include Datsun and Volvo models as well as Volkswagens. The factory was sold to Nissan in 1976 and Australian assembly of Volkswagens ended shortly after.



                                     

3. Tuning companies

Current tuning or customisation companies in Australia include:

  • Corsa Specialised Vehicles* CSV is a small-scale automaker established in 1994 that is based in Mildura, Australia. Its range consists of V8 engine high performance cars based on those produced by Holden.
  • Holden Special Vehicles HSV – the official performance vehicle partner of Holden
  • Tickford Racing
  • Walkinshaw Performance – authorised Holden Special Vehicles and Hummer tuning company
  • Tekno Autosports
                                     

4. Past tuning companies

  • Ford Performance Vehicles FPV – Ford Australias in-house tuning company 2002–2014
  • Ford Tickford Experience FTE – former official performance vehicle partner of Ford Australia 1991–2002
  • HDT Special Vehicles HDT – former Holden tuning company manufacturing arm of the Holden Dealer Team
  • Dick Johnson Racing
  • Wayne Gardner Racing
                                     
  • Play media The automotive industry comprises a wide range of companies and organizations involved in the design, development, manufacturing, marketing
  • The Australian Automotive Aftermarket Association AAAA is an automotive industry association that represents the automotive aftermarket parts and accessories
  • The automotive industry in Canada consists primarily of assembly plants of foreign automakers, most with headquarters in the United States or Japan, along
  • The Brazilian automotive industry competed with other Latin American ones Mexico and Argentina comparably till 1960, but had two jumps then, making
  • Australian Motor Industries AMI was an automobile assembly firm that was significant in the early history of the automotive industry in Australia The
  • The automotive industry in India is one of the largest in the world. In 1897, the first car ran on an Indian road. Through the 1930s, cars were imports
  • Automotive production is a significant industry in Russia, directly employing around 600, 000 people or 1 of the country s total workforce. Russia produced
  • This article provides an overview of the automotive industry in countries around the world. The United States was the world s largest automobile producer
  • The automotive industry in Malaysia consists of 27 vehicle producers and over 640 component manufacturers. The Malaysian automotive industry is the third
  • The automotive industry in China has been the largest in the world measured by automobile unit production since 2008. Since 2009, annual production of