ⓘ Barbat (lute)

Barbat (lute)

ⓘ Barbat (lute)

The barbat or barbud was a lute of Central Asian or Greater Iranian or Persian origin. The barbat was an important instrument of the Ghassanids in pre-Islamic times and of the Syrians in early Islamic times. It was characterized as carved from a single piece of wood, including the neck and a wooden sound board. It would be ancestral to the wood-topped oud, pipa and biwa and the skin-topped Yemeni qanbus.

Although the original barbat disappeared, modern musicians have re-created the instrument, looking at historical images for details. The modern re-created instrument Persian Barbat resembles the oud, although differences include a smaller body, longer neck, a slightly raised fingerboard, and a sound that is distinct from that of the oud.


1. History

The barbat probably originated in Central Asia. The earliest image of the barbat dates back to the 1st century BC from ancient northern Bactria. While in his book Les instruments de musique de l’Inde ancienne Marcel-Dubois pointed out a more "clear cut" depiction of the barbat from Gandhara sculpture dated to the 2nd-4th centuries AD, which may well have been introduced by the Kushan aristocracy whose influence is attested in Gandharan art. The name itself meant short-necked lute in Pahlavi, the language of the Sasanian Empire, through which the instrument came west from Central Asia to the Middle East, adopted by the Persians. The barbat was used by some Arabs in the sixth century. At the end of the 6th century, a wood topped version of the Persian-styled instrument was constructed by al Nadr, called "ūd", and introduced from Iraq to Mecca. This Persian-style instrument was being played there in the seventh century. Sometime in the seventh century it was modified or "perfected" by Mansour Zalzal, and the two instruments barbat and "ūd shabbūt" were used side by side into the 10th century, and possibly longer. The two instruments have been confused by modern scholars looking for examples, and some of the ouds identified may possibly be barbats. Examples of this cited in the Encyclopedia of Islam include a lute in the Cantigas de Santa Maria and the frontispiece from The Life and Times of Ali Ibn ISA by Harold Bowen.


1.1. History Kusana origin of short lutes

Laurence Picken in his 1955 article The Origin of the Short Lute laid out an argument for the lute originating in the lands of the Kusana peoples. He looked at the likely places for the short ovoid lute to originate. He showed that the evidence found by 1955 indicated that China would not likely have had the such a lute earlier than the 5th century. He found no evidence of the Sasainian barbad or barbud earlier than the 4th century A.D. The earliest evidence was to be found among the Kusanas. He considered other peoples further west, but only found evidence of long-necked lutes. The only other possibility was among the "Elamic clay figures" from the 8th century B.C. These were discounted, as "no structural detail are visible." He was careful to point out that his conclusions were based on the evidence which had been unearthed by 1955, from literature and art.


1.2. History Iconographic evidence

In his paper which summarized what was known about early examples of Asian harps and lutes, focusing on images and literature for his sources, Michael Nixon pointed out that one image of the barbat from Sasanian Iran estimated origin in his paper 3rd-7th centuries A.D and 7th-8th centuries A.D. by the British Museum resembled other images of the barbat from Sasanian and Gandharan sources. He said that the instrument itself resembled these and was held in the same manner. The instrument also resembled an image from a door-lintel bas-relief from the Gupta period in Padmavati Pawaya, India.240-605. A.D)

The Ganharan image he points to c. 2nd-4th centuries A.D. was published in Kurt Sachs book The History of Musical Instruments in 1940. It shows a man holding a lute-style instrument with bottom of the rounded bowl of the instrument held to his chest, the neck of the instrument held down at a approximately 45 degree angle, and the man strumming the instrument near his chest.

Another image from Gandhara from an overlapping time period 100-320 A.D. is in the collection of the Cleveland Museum of Art. The image shows a similarly shaped instrument, with similar bridge the bar at the bottom of the instruments bowl held and strummed in the same manner. This image, unlike the other two mentioned, shows sound holes, an indication that this instrument had a wooden soundboard and not a skin top.

Jean During, who wrote the 1988 Barbat article used by the Encyclopedia Iranica, cites two images of short lutes as being the oldest currently known. One is in Ḵalcayān Uzbekistan, c. 1st century A.D. The other, "at the moment the oldest evidence of the existence of the barbat," was at Dal’verzin Tepe, c. 1st century B.C.

Another early source of lute images from Central Asia comes from East Kashkadarya, where coroplast statuettes c. 1st Century B.C. to 1st Century A.D. from the Kangyui period were found, female lutenists that appear religious, depticting a female goddess playing a lute. The Kangyui Kingdom was in the Kazakhstan and Uzbekistan region from the 2nd century B.C. to the 4th century A.D. The lutes are short lutes, but the detail in the statuettes is low. Whether they are the same as the other short lutes in the area is not clear.


2.1. The modern instrument Holding the barbat

The barbat is held similar to a guitar, but care must be taken to have the face vertical so that it is not visible to the player, and to support the weight with the thigh and right arm so that the left hand is free to move around the fingerboard. Note the idiosyncratic manner of holding the mizrab Turkish or risha Arabic, lit. "feather" or pick; although it seems awkward it is in reality easier than a conventional flatpick and gives the "right" tonal shading to the plucked note.

In all matters of holding and playing it is recommended that the player use only the muscles needed for any musical task and to relax as much as possible, using only as much force as is necessary. This will allow one to play longer, easier and to put the effort into creativity rather than mechanics. In the past many players sat cross-legged on a rug, but now most perform sitting, often using a classical guitarists footrest under the right foot to help hold the barbat.


2.2. The modern instrument Basic fingering

Two methods of left hand fingering are in current usage. The older, more traditional Classical Arabic approach uses all four fingers for stopping the strings, one for each semitone much as a guitarist; alternatively, some play with a style more akin to baglama or saz or sitar technique, using mainly the first and second fingers, with less use of the third and little use of the fourth fingers. Hakki Obadia taught a mixed fingering system that uses finger 1 for several notes, finger 2 for some, but not all strings and finger 3, but not finger 4.

Another important facet of left hand technique is the employment of the fingernail to help stop the string, giving a clearer tone and more pronounced ornaments than use of the fleshy tips alone. This is common to several other fretless instrument, among them the sarod, shamisen and san-xien.


2.3. The modern instrument Right hand-the mizrab or risha

As mentioned the right hand employs a special method for holding the quill-inspired pick called risha in Arabic and mizrab in Turkish. The long flexible pick puts the wrist at a particular angle and adds a certain tonal color to the sound. The traditional material was an eagle quill, but this is not practical; plastic makes a more durable and standard material for the risha. Players have used things like collar stays, plastic pieces from hardware stores, cut-up plastic bottles this worked better with the old heavyweight containers, and of course the Turkish manufactured models. These come in a thin, more-or-less pointed tip style made of lighter gauge translucent plastic and a round tip model made of heavier white opaque stock. The thinner ones are lovely sounding and play very delicately with subtle nuances; the heavier ones play very loud.

Variations can be obtained by cutting a new tip on the thinner ones a bit further back where the plastic is a little thicker, adding volume to the attack. The rounded ones can be cut to a pointer shape and thinned a fraction with fine sandpaper adding nuance to the heavier attack produced by this pick. Both kinds are made double-ended from the factory, so one end can be left original and the other end customized, the player using the appropriate end for the musical need.


2.4. The modern instrument Body

The barbats body contains three major parts:

  • Fingerboard: Without frets or fretless, and the neck. Some earlier illustrations show frets arranged to include microtones.
  • Bent-back pegbox: There is a great angle between the fingerboard/neck and pegbox. This is very important, it has several tuning pegs and if the bent-back pegbox is weak, the instrument won’t be tuned very well.
  • Resonating body: It is like a pear and it is the biggest resonating body in comparison with other bodies. There are three sound holes and lattices on its body, one bigger than two others.

Traditional materials of the barbat

  • Neck: Walnut
  • Lattices of hole: Walnut
  • Resonating body: Walnut or maple.
  • String fastener or bridge: Boxwood.
  • Pegs: Walnut or ebony
  • Top sheet: Deal
  • Pegbox: Walnut
  • Nut: Bone or plastic

2.5. The modern instrument How to make a barbats resonating body

There are two traditional methods:

Carved body: For this a log is cut in two pieces. On one a silhouette of the body is drawn, then the half log would be carved and scraped by tools from the inside and outside. Then it will be left to be dried.

Constructed body: In this method sections of walnut or mulberry wood are cut and boiled in hot water. These sections or ribs should have the thickness around 2 -3 mm. When they are flexible they are stressed on a crescent shaped mold or former. After drying, they will be glued and joined to each other. Then the neck and the top plate or belly will be joined to complete the structure.

  • Barbat may refer to: Barbat early Romanian voivode Barbat Croatia, a village on the island of Rab, Croatia Barbat River in Romania Barbat lute an
  • Massoud Shaari Behdad Babaei Abdollah Alijani Ardeshir Music of Iran Barbat lute Bağlama Sitar The Chinese translation - 萨塔尔, sàtǎ er - is a transliteration
  • is very similar to modern lutes and also to Western lutes The modern oud is most likely derived from the Persian barbat Similar instruments have been
  • 224 651 Under the Sasanians, a short almond shaped lute from Bactria came to be called the barbat or barbud, which was developed into the later Islamic
  • constructed by Siamak Afshari. It is inspired by the ancient Persian lute called barbat The barbat used to have three strings, but the sallaneh has six melody
  • Encyclopedia of Islam with making improvements on the design of the barbat lute which was then called the ūd shabbūt. He was the Teacher of great musician
  • The cobza also cobsa, cobuz, koboz is a multi - stringed instrument of the lute family of folk origin popular in Romanian and Moldovan folklore it is considered
  • angelica is a plucked string instrument of the lute family of the baroque era. It combines features of the lute the harp, and the theorbo. It shares the form
  • wood - topped lute moved east to China as the Pipa south to India as the Vina and west to the Middle East, Africa and Europe as the Barbat and Oud. From
  • Roman classics related to the lyre. The barbat or barbud, also sometimes called barbiton, is an unrelated lute - like instrument derived from Persia. The
  • their heads. Farrokhi was also a master of music and could play the barbat lute and sing. He later moved to the court of the Ghaznavids, first Mahmud
  • of the lute and guitar instruments. Akkadians played similar instruments from the 3rd millennium BC. Ancient Greek artwork depicts such lutes from the