ⓘ BMW 3 Series (E21)
The BMW 3 Series is a line of cars made by BMW from 1975 through 1983, the first generation of the 3 Series. The E21 eventually succeeded the 02 Series. It was followed by the second-generation E30, continuing on to the current seventh generation G20.
Initial models were produced in a two-door sedan body style with four-cylinder petrol engines. Fuel-injected engines were introduced in late 1975 and 6-cylinder engines were added in 1977. A cabriolet body style - manufactured by Baur - was produced from 1978 to 1981.
There was no BMW M3 model for the E21 generation, but several limited edition models were produced based on the top version, the six-cylinder 323i.
Under the direction of its majority 51% shareholder, Herbert Quandt, BMW decided upon a replacement for their aging 02 Series.
In July 1975, BMWs Board of Management introduced the E21 to the public at the Munich Olympic Stadium.
The frontal view of the new car was dominated by the BMW trademark kidney grille standing out clearly from the radiator cover. The styling of the new car bore a resemblance to the E12 5 Series which was in production as the E21 was introduced. Like many other BMW models, the C-pillar of the E21 has a Hofmeister kink.
Paul Bracq, Director of Design at BMW from 1970 to 1974, is credited with setting the design direction of the E21.
The cockpit design of the E21 marked the introduction of a new design concept, with the center console and central dashboard area angled towards the driver. This has become part of BMWs interior design philosophy for many years. As a sign of passive safety, all edges and control elements within the interior were rounded off and padded.
4.1. Engines 315
The 315 was the base model for years 1981 to 1983, with a 55 kW 74 bhp version of the 316s 1.6-litre engine tuned for fuel economy. It accelerates to 100 km/h in 14.8 seconds and has a top speed of 154 km/h 96 mph.
4.2. Engines 316
The 316 was the base model for years 1975 to 1981, fitted with a 1.6 L 98 cu in M10 engine producing 73 kW 98 bhp. It accelerates to 100 km/h 62 mph in 14 seconds and has a top speed of 160 km/h 99 mph.
In 1980 the engine size increased to 1.8 litres after the 318 carburetor version was discontinued, while the model badge remained as "316". Acceleration to 100 km/h was reduced to 12.5 seconds and top speed increased to 167 km/h 104 mph.
4.3. Engines 318
The 318 was a mid-range model that was powered by a carburetted four-cylinder engine. It accelerates to 100 km/h in 12 seconds and has a top speed of 165 km/h 103 mph.
4.4. Engines 320
The initial 320 model was powered by a four-cylinder engine using a Solex 2-barrel downdraft carburettor. It accelerates to 100 km/h 62 mph in 11.5 seconds and has a top speed of 170 km/h 106 mph.
4.5. Engines 320i
The 320i was released in late 1975. It has a continuous port injection system Bosch K-Jetronic instead of a carburetor. It accelerates to 100 km/h 62 mph in 10.5 seconds and has a top speed of 180 km/h 112 mph.
4.6. Engines 320/6
In 1977, the 320 model switched from the BMW M10 four-cylinder engine to the BMW M20 six-cylinder engine. Although they remained badged as "320", the six-cylinder model is often referred to as "320/6". The engine uses a Solex 4-barrel downdraft carburetor. The 320/6 accelerates to 100 km/h 62 mph in 10.0 seconds and has a top speed of 180 km/h 112 mph.
4.7. Engines 323i
The 323i was the top E21 model following its introduction in 1977. It is powered by a 2.3 litre six-cylinder engine using Bosch K-Jetronic fuel-injection. It accelerates to 100 km/h 62 mph in 8.7 seconds and has a top speed of 200 km/h 124 mph.
- 4-speed Getrag 242 manual
- 3-speed ZF 3HP22 automatic 318 and 320
- 5-speed Getrag 245 manual, with either overdrive or close-ratio gearing factory option, from 1976
6. Chassis and suspension
With a wheelbase measuring 2.6 m 102 in, the lengths of the overhanging front and rear bodywork was minimal. The track measured 1.364 mm 54 in at the front, and 1.377 mm 54 in at the rear.
The suspension incorporated rack and pinion steering and MacPherson strut suspension at the front, and semi-trailing arm type independent suspension at the rear. The rear suspension design causes camber changes, which can introduce "snap oversteer" at the handling limits. The power assisted brakes were discs on the front wheels, while the rear wheels had drum brakes except the 323i model which had discs all round.
7. Model year changes
At the E21s release, three models were available: with 316 1.6-litre, 318 1.8-litre and 320 2.0-litre versions of the BMW M10 four-cylinder engine. To differentiate between models, the 320 model came with dual headlights, while the 316 and 318 had single headlights.
7.1. Model year changes 1975
The fuel-injected 320i was introduced at the end of 1975. It has the M10 four-cylinder engine with Bosch K-Jetronic fuel injection, and a limited slip differential was available as an option.
7.2. Model year changes 1977
At the 1977 International Auto Show in Frankfurt, BMW unveiled its new variants of the E21, featuring the new BMW M20 six-cylinder engines which were initially called "M60".
The four-cylinder 320 model was replaced with the 320/6, featuring a 2.0 litre version of the M20 engine. The new range-topping 323i model was introduced, featuring 2.3 L with 105 kW 141 hp, which gave the 323i a top speed of 200 km/h 124 mph. The braking system was also upgraded, with the 323i featuring disc brakes on all wheels. Options include power steering, a 5-speed close-ratio dogleg sport gearbox, and 25% limited slip differential.
7.3. Model year changes 1980
For the 1980 model year, the four-cylinder models were upgraded: the 1.8 L carburetted M10 unit was revised to produce 66 kW 89 hp and entered the market in the updated 316, while a fuel-injected version of the 1.8 L M10 was introduced in the 318i model which replaced the carburetted 318 as the mid-range model. This fuel-injected 1.8 L M10 was also sold in Sweden with 320i badging with a higher level of standard equipment to distinguish it from the 318i, because the 320/6 was never certified for sale there.
7.4. Model year changes 1981
The economy model 315 was introduced as a reaction to the second "oil crisis" in late 1979. More spartan than the other E21 models, it was the last E21 to be built and produced alongside the early E30 models.
8. Baur TopCabriolet
A cabriolet conversion was offered by Karosserie Baur, called the TopCabriolet. It consisted of a targa roof and an independent rear soft-top. Production of the TopCabriolet began in 1978, and were sold via the BMW dealership network.
All Baur models included the BMW warranty. A total of 4.595 vehicles were manufactured before production ended in 1981.
9. North American models
The E21 was sold in the United States from model years 1977 to 1983 as the four-cylinder 320i and 320is. Six-cylinder models were not sold in America, because the E21 versions of the M20 engine did not meet U.S. emissions regulations at the time. The 320i models sold in the United States have a thermal reactor as a pollution control device.
From 1977 to 1979, the U.S. models are both powered by a 2.0 L 122 cu in fuel-injected version of the M10 four-cylinder engine. In 1980, the M10 engine was downsized to 1.8 L 110 cu in, resulting in a 100 km/h 62 mph acceleration time of 11.1 seconds and a top speed of 169 km/h 105 mph.
Due to American regulations, the following changes were required:
- larger front and rear "diving board" bumper bars, which increased the cars overall length by 16 cm 6 in to 4.5 m 177 in.
- speedometer in miles-per-hour
- a detuned version of the M10 engine, initially using a thermal reactor to control exhaust emissions
- sealed beam headlights, larger indicator lights and side reflectors
- in 1980, the engine was downsized from 2.0 L to 1.8 L and the thermal reactor was replaced with a catalytic converter.
- fuel gauge markings changed from litres to "full, ½, reserve"
In 1980, the 320is model was released in the United States, powered by a 1.8 L 110 cu in version of the M10 four-cylinder engine. The "S Package" had Recaro sport seats, upgraded suspension components that included a rear anti-roll bar and a larger front anti-roll bar, a 5-speed transmission and limited-slip differential, cross-spoke alloy wheels, a larger and more extensive tool kit, a dual operation manual sunroof, an AM/FM Blaupunkt radio with cassette player, fog lights, a 3-spoke leather-wrapped steering wheel and leather shift knob, a front air dam, a "delete" of the alphanumeric 320i markers on the rear trunk lid, a "delete" of factory air conditioning; an central-dash storage area where A/C controls were normally mounted, and a limited color palate of white, silver or black. Just 2.500 320iss were produced.
Production of the E21 began in June 1975 and finished in 1983. Total production estimates vary between 1.359.444 and 1.364.039 cars.
The E21 was produced at the BMW plant in Munich, Germany. Models sold in Malaysia used complete knock-down kits produced in Germany, which were assembled in Kuching, Malaysia.
The Group 5 version of the BMW 320 introduced in 1977 as a replacement to the BMW 3.0 CSL, nicknamed the Flying Brick in reference to the blocky bodyshape, was powered by a Formula Two engine that was tuned to 225 kW 302 bhp by BMW Motorsport. The car was developed in only just over 12 weeks, without technical drawings. BMW Motorsport engineers simply carried out the modifications directly, with the car progressively taking its final shape.
The Group 5 320 was also used by the McLaren team in the American International Motor Sports Association series. It was also used by the BMW Junior Team, whose drivers included Manfred Winkelhock, Eddie Cheever, and Marc Surer. The 320 won its first race, at Zolder in 1977 with Marc Surer at the wheel. It also won the 1981 and 1982 Guia Race of Macau.
- The first generation of the BMW 4 Series consists of the BMW F32 coupe version BMW F33 convertible version and BMW F36 four - door coupe version
- The BMW E 12 is the first generation of 5 Series executive cars, which was produced from 1972 to 1981 and replaced the saloon models of the BMW New Class
- The seventh generation of the BMW 5 Series consists of the BMW G30 sedan version and BMW G31 wagon version, marketed as Touring executive cars. The
- sixth generation of the BMW 5 Series consists of the BMW F10 sedan version BMW F11 wagon version, marketed as Touring and BMW F07 fastback version
- The BMW E 34 is the third generation of the BMW 5 Series which was produced from 1987 until 1996. Initially launched as a sedan in January 1988, the E 34
- The BMW E 32 is the second generation of the BMW 7 Series luxury cars and was produced from 1986 to 1994. It replaced the E 23 and was initially available
- Sedans. The first 02 Series produced was the 1600 - 2 later renamed 1602 in 1966. In 1975, the 02 Series was replaced by the E21 3 Series except for the 1502
- The BMW E 31 is the first generation of the BMW 8 Series It is a grand tourer built by BMW from 1990 to 1999 powered by either a V8 or V12 engine. While
- The first generation of the BMW 2 Series consists of the BMW F22 coupe version and BMW F23 convertible version subcompact executive cars. The F22 F23
Users also searched:
bmw 3 series e21 for sale, bmw e21 323i, bmw e21 parts,