ⓘ BMW 5 Series (E39)
The BMW E39 is the fourth generation of BMW 5 Series, which was sold from 1995 to 2004. It was launched in the sedan body style, with the station wagon body style introduced in 1996. The E39 was replaced by the E60 5 Series in 2003, however E39 Touring models remained in production until May 2004.
The proportion of chassis components using aluminium significantly increased for the E39, and it was the first 5 Series to use aluminium for all major components in the front suspension or any in the rear. It was also the first 5 Series where a four-cylinder diesel engine was available. Rack and pinion steering was used for four- and six-cylinder models, the first time that a 5 Series has used this steering system in significant volumes. Unlike its E34 predecessor and E60 successor, the E39 was not available with all-wheel drive.
The high performance E39 M5 sedan was introduced in 1998, powered by a 4.9 L 299 cu in DOHC V8 engine. It was the first M5 model to be powered by a V8 engine.
1. Development and launch
Development for the E34s successor began in 1989, and ended in 1995. The final design by Joji Nagashima was selected in June 1992 and later frozen for production under new design chief Chris Bangle. With design selection in 1992, the series development phase began and took 39 months till start of production. The domestic German design patent was filed on 20 April 1994, with an E39 prototype.
In May 1995 BMW published the first official photos of the E39. The E39 premiered in September 1995 at the Frankfurt Motor Show. In December 1995 sales of sedan models began on the European mainland. Production of wagon/estate models began in November 1996.
The E39 was one of the first vehicles alongside the E38 7 Series to have curtain airbags, which protect the occupants heads in a side impact. Standard equipment on the launch models included dual front and side airbags, pretensioners and load limiters for the front seatbelts, anti-lock brakes, traction control, power steering, and air conditioning. Satellite navigation was also available, initially using maps on CD-ROMs, then moving to DVD maps in 2002. Several models were available in Sports or Executive trim levels.
Special options available options on wagon models were either a roller blind or extending cargo cover with patrician net for the rear cargo area, roller sun visors for rear and side windows.
A "latent heat accumulator" was available as an option up until September 1999. The accumulator stores engine heat by converting a salt from solid to liquid form phase transition. The insulated tank can store heat for several days. The next time the vehicle is started, this heat is automatically used to reduce exhaust emissions by heating the engine up to operating temperature quicker, for cabin heating and window defrosting.
Separate to the latent heat accumulator is the Residual Heat function activated by a button labelled "REST", which allows the demister and cabin heater to use the heat of an engine that has recently been turned off using an electric pump to push hot coolant through the heater core.
3.1. Engines Petrol engines
At launch, the petrol engines consisted of the BMW M52 straight-6 and the BMW M62 V8. In late 1998, the "technical update" TU versions of these engines were introduced, introducing double VANOS to the M52 and single VANOS to the M62, primarily to increase torque at low rpm. For the facelift of the model range in the year 2000, the M52 was replaced by the BMW M54 straight-6 engine, however the M62TU remained in use for the V8 models. The M54B30 used in the 530i model topped the Wards 10 Best Engines list in 2002 and 2003.
Specifications for European models are shown below.,
3.2. Engines Diesel engines
The initial diesel models used the BMW M51 turbocharged straight-6 engine. In 1998, its successor the BMW M57 was introduced in the 530d model, however the BMW M51 engine continued to be used for two more years in the 525td and 525tds models.
In 1999, the M47 four-cylinder turbo-diesel was introduced in the 520d model, which is the only E39 model to use a four-cylinder engine.
Specifications for European models are shown below.,
4.1. Drivetrain Manual transmissions
Six-cylinder petrol models were fitted with either the 5-speed Getrag 250G or ZF 320Z S5-32 transmission, depending on the year and model. Diesel models with the M51 engine were fitted with the 5-speed ZF 260Z transmission, while the M57 diesel models were fitted with the 5-speed ZF 390 S5-39DZ transmission. V8 petrol models were fitted with the 6-speed Getrag 420G transmission.
4.2. Drivetrain Automatic transmissions
Some pre-facelift six-cylinder petrol models were fitted with the 4-speed GM 4L30-E A4S270R transmission. All other six-cylinder models were fitted with 5-speed transmissions, either the GM 5L40-E A5S360R, GM 5L40-E A5S390R, or ZF 5HP19 A5S325Z transmission, depending on the year and model. V8 petrol models were fitted with either the 5-speed ZF 5HP24 A5S440Z or the 5-speed ZF 5HP30 A5S560Z.
4.3. Drivetrain Differential ratios
The following differential ratios were used by the E39:
- 2.81: 540i manual
- 2.93: 528i/530i manual
- 3.07: 528i manual
- 3.46: 525i/528i/530i automatic
- 4.10: 528i automatic
- 3.15: 525i manual, 525i/540i automatic, M5 manual
- 3.23: 525i manual
Unusually, two different steering systems were used for the E39, depending on the engine. Models with four-cylinder and six-cylinder models use rack and pinion steering, the first time this system has been used in a 5 Series expect for the E34 525iX model. This system steers from the front of the axle.
Models with V8 engines use recirculating ball steering, as per the previous generations of 5 Series.
6. Chassis and body
Compared with its E34 predecessor, the E39s wheelbase grew by 68 mm 2.7 in and overall length by 55 mm 2.2 in. Torsional rigidity was increased over the E34 by 40 percent, which reduces body flex and allows the suspension to operate more accurately, also improving ride quality. Structural dynamics were also an objective of the body design, so the bodys frequencies for torsional twisting and bending are in separate ranges and above the natural frequency of the body. These frequencies are out of the range of engine and driveline vibrations, to avoid vibrations being amplified.
Due to a stiffer body shell, the weight of the chassis increased by 10 kg 22 lb, which is offset by the reduced weight of some aluminium suspension components. The wagon version was 85 mm 3.3 in longer than the previous generation E34 and weighed approximately 40 kg 88 lb more.
The E39 was the first 5 Series to use aluminium for most components in the front suspension. The proportion of chassis components using aluminium significantly increased for the E39.
The front suspension consists of a double-jointed version of the MacPherson strut, with six-cylinder cars using an aluminium front subframe. Aluminium is used for the steering knuckles, outer strut tube and the spring pads, resulting in a weight saving of 21 kg 46 lb. V8 models also use aluminium in the steering box and several suspension links, to compensate for the heavier steel subframe.
The rear suspension consists of a four link design called "Z-link", which is similar to the system used by the E38 7 Series. The design minimises unintentional toe angle changes, which increases the stability of the handling.
7.1. Suspension Wagon self-levelling suspension
The Touring model was the first BMW model to use air suspension self-levelling suspension was first used by BMW for the E23 7 Series with a closed-loop nitrogen system that operated in parallel with the steel springs. This "self leveling" system controls the ride height of the rear of the vehicle and is designed to keep the center of the wheel a specified distance from the lip of the fender as the weight of the load in the cargo area varies.
Instead of using a traditional coil springs, the system uses pneumatic springs paired with air reservoirs that are pressurised by an air compressor. The system is controlled by two Hall effect sensors at the rear of the vehicle. These sensors tell the EHC electric height control if the rear ride height needs to be adjusted and adjust headlight height for vehicles equipped with Xenon headlights. When a door or the rear hatch is opened and then closed the control module will constantly monitor the input signals from the HALL sensors and will activate a correction if the ride height has change greater than 10mm. During normal operation the system stays online but does not adjust to conditions such as potholes.
8. M5 model
The M5 model of the E39 was introduced in 1998 at the Geneva Motor Show and was produced from 1998 to 2003. It was powered by the S62 V8 engine. All E39 M5 cars were sold in the sedan body style with a 6-speed manual transmission.
9.1. Special models Alpina B10 and D10
The Alpina B10 3.2, 3.3, V8 and V8S petrol-engined models were built in sedans and wagon body styles based on the E39 from January 1997 to May 2004.
The Alpina D10 was the first diesel model produced by Alpina and was introduced in February 2000. The engine, a 3.0 litre twin-turbocharged unit rated at 180 kW 241 hp and 500 N⋅m 369 lb⋅ft of torque, was based on the engine of the 530d model.
9.2. Special models Protection line
The 540i Protection light-armored vehicle was launched in Europe in September 1997 and in North America from January 1998. These models included aramid fiber armor, bullet-resistant glass that is coated with polycarbonate to reduce spall. The 540i Protection is rated to withstand the impact of handgun fire up to and including.44 Magnum, the glass is also protected from attack with blunt objects such as baseball bats and bricks. The additional security measures brought an additional weight of 130 kg 287 lb compared to the normal 540i sedan. on request, an intercom system was available and from January 1998 run-flat tyres were available.
10. Model year changes
Most changes occur in September each year, when the changes for the following model year go into production, as is typical BMW practice. Therefore, the changes for 1996 represent the 1997 model year, for example.
10.1. Model year changes 1996
- Station wagon estate, marketed as "Touring" body style introduced.
- 525td model introduced.
10.2. Model year changes 1997
- Cornering Brake Control introduced.
- Rear side airbags introduced.
- On-board computer upgraded.
10.3. Model year changes 1998
- M5 model introduced. Lower-body rear side airbags were standard on the M5, remaining optional for other models.
- Stability control upgraded from ASC+T to DSC.
- Xenon headlights introduced.
- Satellite navigation upgraded from MKI or Mark I to MKII. Like the MKI, the MKII uses a 4:3 screen and stores the maps on a CD.
- Parking sensors "Park Distance Control" introduced.
- 530d model introduced, using the new M57 straight-six turbo-diesel engine.
- Self-levelling rear suspension introduced for Estate models.
- M52 straight-six engines updated to M52TU.
- Self-Adjusting Clutch SAC introduced on the straight-six petrol engines.
- M62 V8 engines updated to M62TU.
10.4. Model year changes 1999
- Front seat airbags upgraded to dual stage
- 520d introduced, powered by a four-cylinder diesel engine.
- Rain-sensing windshield wipers introduced June 1999
- 525d model using M57 engine replaces the 525td model M51 engine.
10.5. Model year changes 2000 facelift
The E39 facelift also known as LCI models began production in September 2000 for the 2001 model year.
- Revised "angel eye" headlights.
- 520i, 525i and 530i models using M54 engines replace the 523i and 528i model M52TU engines.
- Kidney grilles on all models are changed to those of the M5.
- Navigation screen updated from 4:3 to larger 16:9 widescreen.
- 530d model receives power increase.
- Revised tail lights with LED running lights.
10.6. Model year changes 2001
- Automatic transmission cars had the manual shift direction switched to forwards for downshifts, backwards for upshifts.
- M Sport package introduced for the 540i
- Automatic headlights introduced.
- Power passenger seat becomes standard on 6 cylinder models and automatic climate control becomes standard on 525i.
- In-dash CD player becomes standard equipment on all models.
10.7. Model year changes 2002
- Navigation upgraded from Compact Disk format 8 disks to cover the United States and Canada to a single DVD.
10.8. Model year changes 2003
- Additional chrome trim added on the trunk boot and on the sides of the body.
11.1. Country-specific model ranges Indonesia
In Indonesia, the initial model range in 1996 was the 523i and 528i, with only the 523i available with a manual transmission. Following the September 2000 facelift, the line-up consisted of 520i, 525i and 530i. Indonesian models were assembled in Jakarta from complete knock-down kits.
11.2. Country-specific model ranges United States
From 1997–1998, the E39 model range in North America consisted of the 528i and 540i, In 1999 the M5 was introduced along with station wagon marketed as "sports wagon" versions of the 528iT and 540iT. In 2001, the 528i was discontinued and replaced by the 525i 525iT in estate/wagon format and 530i.
In 2001, the American market 540is power output was increased to 216 kW 290 hp, unlike other markets where the 540is power remained at 210 kW 282 hp. All North American models from factory arrived pre-wired for mobile phones; it was a dealer option to have a mobile phone installed into the center console. The station wagon models were marketed as "Sports Wagon" and standard features included roof rails for mounting a roof rack.
In 2003 BMW sold the 540i M-Sport package as a limited production model in the United States, with 1.190 cars produced with a manual transmission. Upgrades included 18-inch wheels and various cosmetic features.
Sales in the United States for May 1999 to May 2000 were 19.294 vehicles. The following year, sales for May 2000 to May 2001 were 15.233 vehicles.
Car and Driver featured the E39 in its "10Best list" six consecutive times, from 1997 to 2002. In 2001, Consumer Reports gave the 530i its highest car rating ever, declaring it the best car they had ever reviewed to date.
Other reviewers have also praised the E39 models.
The first pilot production models were built in February 1995, with full-scale production starting later in the year. Most cars were built at the Dingolfing factory, with complete knock-down assembly used in Mexico, Indonesia and Russia. CKD production amounted to 17.280, with total production numbering 1.488.038.
- The BMW 8 Series is a range of grand tourers produced by BMW The 8 Series was introduced in 1990 under the E 31 model code and was only available as a
- BMW expanded its range by adding coupe and luxury sedan models. The BMW 5 Series mid - size sedan range was introduced in 1972, followed by the BMW 3
- sixth generation of the BMW 3 Series consists of the BMW F30 sedan version BMW F31 wagon version, marketed as Touring and BMW F34 fastback version
- The BMW 3 Series E 21 is a line of cars made by BMW from 1975 through 1983, the first generation of the 3 Series The E 21 eventually succeeded the 02
- The BMW X 5 F15 is a mid - size luxury SUV manufactured and marketed worldwide by BMW since 2013. The car was unveiled in the 2013 Frankfurt International
- and was launched in 2017 as the successor to the BMW 5 Series Gran Turismo. Details of the 6 Series Gran Turismo were released online on June 14, 2017
- R1200S BMW K1200LT BMW K1300GT BMW K1300R BMW K1300S BMW K1600GT and K1600GTL BMW S1000RR BMW S1000XR Beginning with the 1972 E 12 5 Series most BMW automobiles
- The BMW 4 Series is a range of coupe, convertible and fastback models manufactured by the German automaker BMW since 2013. It was unveiled at the North
Users also searched:
bmw e39 540i for sale, bmw e39 m5,